Policy SY16 REGULATIONS FOR BICYCLES / MOPEDS / SKATEBOARDS / SCOOTERS / IN-LINE SKATES / ROLLER SKATES / ELECTRIC PERSONAL ASSISTIVE MOBILITY DEVICES

Policy Steward: Assistant Vice President for Police and Public Safety

Contents:

  • Purpose
  • Definitions
  • Bicycles and Mopeds
  • ....Operation
  • ....Registration
  • ....Regulations
  • ....Penalties
  • Electric Personal Assistive Mobility Devices
  • ....Operation
  • ....Registration
  • ....Regulations
  • ....Responsibilities
  • Skateboards, Scooters, In-Line Skates/Roller Skates, and Similar Devices
  • ....Regulations
  • Further Information

  • PURPOSE:

    The following rules and regulations for bicycles, mopeds, skateboards, scooters, in-line skates, roller skates and electric personal assistive mobility devices apply to all persons operating any such mode of transportation on University property.

    DEFINITIONS:

    Acrobatics – any action on roller blades, in-line skates, bicycles, or any other human powered transportation device in which both blades, skates or wheels are off the ground simultaneously, or where the device is being used in a manner not consistent with normal transportation.

    Bicycle - a two-wheeled pedal cycle.

    Electric Personal Assistive Mobility Devices (EPAMDs, aka. Segways) - a self-balancing two-wheeled device with an electric propulsion system designed to transport only one person.

    In-Line Skates - a type of roller skate with in-line wheels.

    Mall – a public area designated as a pedestrian walkway.

    Moped - a motorized pedal cycle with operable pedals, a motor rated at 1.5 horsepower or less with a cylinder displacement of less than 50cc's.

    Pedal cycle - unicycles, bicycles, and tricycles. Vehicles that are designed to be propelled solely by human power.

    Roller Skate - a shoe, or attachment for shoe, with a set of wheels attached for skating.
    Scooter - a narrow platform mounted on tandem wheels with a handle to steer by turning the front wheel.

    Sidewalk – A paved pathway, commonly used by pedestrians, running parallel to a road.

    Skateboard - a board of any length (long boards) mounted on roller skate-type wheels.

    Sled - A coasting device with runners designed to slide on ice and snow.

    Roller skates, in-line skates, skateboards, scooters, sleds, and similar coasting devices are not vehicles and are prohibited on roadways. Persons on such devices are pedestrians for traffic control purposes.

    BICYCLES AND MOPEDS

    OPERATION:

    All bicycles must be operated according to the provisions of the Commonwealth of Pennsylvania Vehicle Code as it pertains to bicycles, as well as to the rules and regulations contained in this policy.

    A moped shall be operated in accordance with all laws and University rules governing motor vehicles. A moped, however, may be registered and parked as a bicycle.

    REGISTRATION:

    Any person bringing a bicycle or moped on any campus of the University shall register the bicycle/moped and obtain a permit.

    NOTE: Those bicycles/mopeds registered by the Borough of State College are valid on the University Park Campus. Also, the University Park-issued permits are valid in the Borough of State College. This is by reciprocal agreement, and identical permits are issued. Upon expiration of the two-year permit, the bicycle/moped must be re-registered. Other University locations may make similar arrangements.

    At University Park, bicycles/mopeds shall be registered on-line at http://www.transportation.psu.edu/transportation/alt-transportation/bicycles/index.cfm . Bicycle permits will be mailed to local addresses only. Registrants may choose to pick up their permit at the Parking Office, 1 Eisenhower Parking Deck. Computers are available for registration in the Parking Office lobby from 7:30 am to 5:00 pm, Monday through Friday.

    At locations other than University Park, the Police/Safety Office will establish locations, times, and procedures for bicycle/moped registrations.

    Each bicycle, in order to be acceptable for registration and issuance of a permit, must be equipped as follows:

    1. A red reflector on the rear visible for a distance of up to 500 feet.
    2. A headlamp is required if a bicycle/moped is operated at night which is visible for a distance of 500 feet.
    3. An amber reflector on each side.

    Registrations and/or permits are not transferable. In the event of the sale of a bicycle/moped, or transfer of ownership, the new owner must register the vehicle in his/her name.

    The non-transferable bicycle permit must be affixed to the middle of the seat tube or visible on the seat post if it is a racing bicycle, and must face the front of the bicycle. The post or seat tube must be clean and dry for the permit to adhere properly.

    REGULATIONS:

    Enforcement of these regulations shall be in effect at all times. Each reference to "bicycle parking" includes moped parking as well when the moped is registered as a bicycle.

    Bicycles shall be ridden on approved bicycle routes and campus roads only. Riders must walk their bicycle at all other places. Specifically, bicycles shall not be ridden sidewalks or on any pedestrian path in the limited bicycle zone, bounded by Fraser Road, Curtin Road, Shortlidge Road, and Pollock Road.

    Bicycles may be ridden on malls and pedestrian paths other than those on central campus, given that the rider exercises due caution and yields to pedestrians. The operator of bicycles on malls and roadways must ride with regard for the safety of pedestrians and property and shall yield to pedestrians. Police Bike Patrols may operate on University walkways for routine patrol duties, when in pursuit of violators, or when responding to emergencies.

    Bicycles shall be parked on campus at places clearly designated by the presence of bicycle racks. Specifically, a bicycle must not be parked in automobile parking spaces, on lawn areas, shrub or flower beds, streets, driveways or in any building. This also includes sidewalks, trees, railing, light poles, entrance ways to buildings, or places that hinder pedestrian travel.

    At University Park, a copy of the bicycle/moped regulations may be obtained at the Transportation Services website (www.parking.psu.edu), at the Parking Office, or at any Parking Information Kiosk. Any abandoned or non-registered bicycle parked on campus, or any bicycle parked hindering University operations, obstructing steps or a handicap ramp may be removed and impounded by Transportation Services. If it is necessary to cut a locking device to remove the bicycle, no reimbursement for the locking device will be made. If unclaimed within 90 days after impoundment, it shall be deemed a gift to the University, to be disposed of through appropriate University channels.

    Any bicycle parked at any location of Penn State shall be parked at the risk of the owner, and should be locked when unattended.

    PENALTIES:

    Violations of these regulations shall subject the violator to penalties as follows:

    NOTE: Mopeds, as motor vehicles, are subject to enforcement and penalties provided under the Commonwealth of Pennsylvania Motor Vehicle Code.
     1. All moving violations
    (Excessive speed, riding on pedestrian ways, stop sign violations, wrong way on a one-way street, passing on the right of traffic, etc.)
     $10.00
     2. Failure to properly register a bicycle/moped  $5.00
     3. Parked or affixed to handrails, handicap ramps,
     wheelchair curb cuts, etc.
     $75.00

    Bicycle penalties are payable at University Park at the University Parking Office. At other University locations, penalties are payable at the Business Office.

    If payment is NOT received within thirty (30) calendar days from date of the violation the penalty will be increased by $3.00. Any person receiving a ticket who feels that the charge is unjust or in error, and who wishes to appeal, may do so. The appeal procedure is as follows:

    An appeal may be made by completing an Appeal of Parking Violation Form, obtained on GURU, or at http://www.transportation.psu.edu/transportation/parking/tickets.cfm. All appeals must be received by the Parking Office within 20 days of the date of violation.

    ELECTRIC PERSONAL ASSISTIVE MOBILITY DEVICES (EPAMDs, aka. Segways)

    OPERATION:

    All EPAMDs must be operated according to the Commonwealth of Pennsylvania Vehicle Code as well as to the rules and regulations contained in this policy.

    REGISTRATION:

    Registration of all EPAMD (aka. Segway) users is required for all users, including students, visitors and employees and will include a color-coded registration sticker to be affixed to the EPAMD.

    At the time of registration, students and visitors will receive written safety procedures (developed by Environmental Health and Safety, University Police and Transportation Services) and will be asked to sign a document stating that they have received the registration and procedures. For individuals who use their own EPAMD on University business (e.g. traveling between classes), registration and hands-on training for these individuals is required.

    At the time of registration, University employees who may be using a University-controlled and owned EPAMD as a part of their job responsibilities will receive hands-on training by Transportation Services or the Director of Business Services.

    Registration stickers will be color-coded and prominently displayed to ensure easy and rapid identification of users in the event that enforcement action is needed.

    REGULATIONS:

    These devices are restricted to sidewalks only, but shall use crosswalks to cross roads.

    Riding of EPAMDs inside buildings is prohibited. They shall be stored in areas that do not block egress or access. They are not permitted to be stored in building lobbies, stairwells, stair towers, corridors and ramps inside or outside of buildings or lined parking spaces. EPAMDs may be walked inside buildings to approved and designated storage and/or charging areas.

    Only people with disabilities who have a documented need to use the device inside of buildings will be allowed to use them inside Penn State buildings. Penn State will consider the request of any faculty, student, or staff person wanting to use the EPAMD inside of buildings as a reasonable accommodation under the Americans with Disabilities Act (ADA). As such, the person will be required to provide appropriate documentation that they have a disability that requires the use of an EPAMD for mobility inside of our buildings.

    For students, the Office of Disability Services (ODS) will be the office responsible for collecting such documentation. ODS is located in 116 Boucke Building at University Park. The phone number is (814) 863-1807.

    Faculty and staff should contact their Human Resources Representative or they can contact the coordinator of ADA Programs in the Affirmative Action Office (AAO). The AAO is located in 328 Boucke Building at University Park. The phone number is (814) 863-0471.

    Regarding operating speeds, persons shall operate at a speed that is reasonable and prudent under the conditions having regard to the actual and potential hazards then existing.

    Helmets meeting ANSI/ Snell Memorial Foundation/ASTM standards shall be worn at all times during operation of the Electric Personal Assistive Mobility Devices by employees. Students and visitors are encouraged to wear such helmets.

    When in use between sunset and sunrise, EPAMDs shall be equipped with - on the front, a lamp, which emits a beam of white light intended to illuminate the operators path and visible for a distance of at least 500 feet to the front, a red reflector facing to the rear which shall be visible at least 500 feet to the rear and amber reflector to each side. A lamp or lamps worn by the operator shall comply with these requirements.

    Operators shall not wear or use headphones or earphones except one earphone for a cellular telephone may be worn.

    RESPONSIBILITIES:

    Transportation Services at University Park) or the Director of Business Services (at Commonwealth Campuses) will be responsible to register EPAMDs used on campus and maintain registration records. They will also jointly develop written safety procedures with Environmental Health and Safety and University Police and provide training on safe use of EPAMDs.

    Risk Management will compile and follow-up as appropriate all non-employee accident reports involving EPAMDs and provide EHS with copies.

    Environmental Health and Safety will review all procedures and reports to periodically monitor incidents, trends and usage of items under this policy, including EPAMDs and recommend appropriate changes. EHS will jointly develop written safety procedures with Transportation Services and University Police for EPAMDs.

    Supervisors (department chairs, faculty and other employees with direct oversight of University employees, including students) will ensure that each employee or student under their supervision or oversight who uses an EPAMD on campus will comply with the registration, training and usage requirements of this policy. This also includes the reporting of all accidents to University Police or Worker's Compensation reports, if injured at work.

    Operators of EPAMDs on Penn State property will ensure that they register these units and follow the use requirements of this policy.

    For students, the Office of Disability Services (ODS) will be the office responsible for maintaining documentation pertaining to requests to use EPAMDs inside buildings as specified herein.

    The Coordinator of ADA Programs in the Affirmative Action Office (AAO) will be responsible for maintaining documentation pertaining to requests to use EPAMDs inside buildings as specified herein.

    SKATEBOARDS, SCOOTERS, IN-LINE SKATES/ROLLER SKATES, AND SIMILAR DEVICES

    The use of skateboards on campus is prohibited. Roller skates, in-line skates, scooters (excluding medical), sleds, and similar coasting devices are not vehicles and are prohibited in roadways. Persons on such devices are pedestrians for traffic control purposes and may be cited for applicable violations of the Pennsylvania Vehicle Code.

    REGULATIONS:

    In addition to restrictions imposed by the Pennsylvania Vehicle Code, the following prohibitions apply to the operation of roller skates, in-line skates, scooters, sleds, and similar coasting devices on the campus:

    No person shall coast or ride upon any roller skates, in-line skates, scooter, sled, or similar device upon any roadway, parking area, or bicycle route, or within any building on the campus. Nor shall any person coast or ride upon any sled or similar device upon any sidewalk or improved surface used only for pedestrian traffic. Persons may coast or ride upon roller skates, in-line skates or scooters on sidewalks, provided they yield the right-of-way to pedestrians on foot. No acrobatics of any kind are permitted.

    Students or employees violating these regulations are subject to disciplinary action by the University. Any other persons violating these prohibitions may be cited for Criminal Trespass for continued or repeated violations of these regulations on the campus.

    FURTHER INFORMATION:

    For questions, additional detail, or to request changes to this policy, please contact University Police & Public Safety.


    Effective Date: December 3, 2014
    Date Approved: December 3, 2014
    Date Published: December 3, 2014

    Most recent changes:

    Revision History (and effective dates):

    | top of this policy | GURU policy menu | GURU policy search | GURU home | GURU Tech Support | Penn State website |